Over The Top Christmas Lights
2015 Behind the Scenes - Flood Panel


Taking a scrap piece of plywood I attached 8 RGB floods using bolts. Running wires out the end and using zip tied they were tied together for easy control. The plywood should be painted flat black to keep it hidden. This flood panel was placed in the middle of the tree and I was able to place the controller at the base of the tree.

Click on a picture to enlarge it.


Place floods on plywood first and mark where to drill holes.

Run all cables out the end to keep them under control.

Website Design
Mysorefigtree@comcast.net

Website Homepage
Mysore Fig Tree